Advance Proterra Sweeper

Details

Industrial Sweeping with Exceptional Dust Control With its wide 64” sweeping path, exceptional maneuverability and high capacity hopper, the Proterra™ Industrial Rider Sweeper will make fast work of large sweeping jobs in factories, warehouses, parking garages, foundries and more.

Benefits of Proterra Industrial Rider Sweepers The Advance Proterra is an easy-to-operate, high-performance sweeping solution that comes equipped with our industry exclusive DustGuard™, which uses a light mist to suppress dust at the side brooms. The result is a dust controlled sweep path that’s 75% more productive than its nearest competitor.

Control dust with our industry exclusive DustGuard™, part of our DustClear™ Five-stage Dust Control System Capture more debris with the tailgate style hopper door Simplify operation and maximize efficiency — Analog-logic™ interface provides intuitive single motion activation of the sweep system, and the Set-’N-Forget™ pressure setting automatically adjusts sweep pressure as the main broom wears Ensure operator safety with our Clear-View™ design, large ergonomic operator comfort zone and large pneumatic tires Invest in a sweeper that’s built to last — rust-proof structural roto-molded hopper, integrated 5 mph bumper and rugged Kubota® industrial engine (battery power also available) Expedite service and repair with MaxAccess™ interlocking compartments for industry-best access to critical components

Equipment Type
Floor Cleaning / Rider Sweepers

Aisle U-Turn:
120 in (306 cm)

Analog-logic™ Controls:
Included

Cleaning path – Dual Side Broom:
64 in (162 cm)

Cleaning path – Single Side Broom:
51 in (128 cm)

Clear-View™:
Included

Debris hopper dump height:
62 in (159 cm)

Debris hopper volume:
11 cb ft (315 L)

Dimensions front tires:
17.5 in (44 cm) .8 ply

Dimensions rear tires:
16.5 in (42 cm) .8 ply

Dust-Clear™ Five stage dust control:
Included

DustGuard™ Dust-control System:
Included

Engine type:
48 V, electric over hydraulic design, 400 Ah C6 battery system

Ergonomic operator comfort-zone:
Included

Height:
57.5 in (146 cm)

Height with overhead guard:
79 in (200 cm)

Length:
87.4 in (222 cm)

Main broom length:
35.5 in (90 cm)

MaxAccess™:
Included

Model No:
56380611

Multi-frequency filter shaker:
Included

National Recognized Test Lab Certification:
ETL

Net weight:
3,140 lb (1,425 kg) with battery

Optional soft sided cab:
Included

Ramp climbing:
17%, 9.6 degrees

Side broom diameter:
21.7 in (55 cm)

Stage 1 DustGuard™ (optional):
Side broom “fog” system 12 gal (45 L)

Stage 2 Vacuumized Main Broom Chamber:
Captures all dust kicked up from main broom

Stage 3 Airflow Labyrinth:
Removes 90% of dust from the air stream

Stage 4 Ultra-Web Nanofiber Filter:
> 98% efficient on 0.3 – 1.0 micron particles

Stage 5 Airflow Restoration System:
Liberator™ variable frequency shaker system

Width:
52 in (132 cm)

  • Variable dump height of up to 62 inches allows fast and simple disposal of swept debris.
  • Ergonomic operator interface used Analog-logic which allows a single operator motion to lower and activate the main broom and side brooms and open the hopper door
  • Optional soft sided cab provides increased operator safety and comfort
  • Large ergonomic operator comfort-zone.
  • LP Engine power from Kubota. Also available with battery power.
  • DustClear Five Stage Dust Control System minimizes fugitive dust
  • Rust-proof structural roto-molded hoper with integrated 5 mpg bumper extends machine life
  • Wide 35.5 inch main broom automatically adjusts broom pressure as the broom wears
  • Tailgate style hopper door captures debris better due to shallow sweep angle, and packs in debris when closing
  • Comfort ride large pneumatic tires increase operator comfort by reducing jarring on rough surfaces
Details

Industrial Sweeping with Exceptional Dust Control With its wide 64” sweeping path, exceptional maneuverability and high capacity hopper, the Proterra™ Industrial Rider Sweeper will make fast work of large sweeping jobs in factories, warehouses, parking garages, foundries and more.

Benefits of Proterra Industrial Rider Sweepers The Advance Proterra is an easy-to-operate, high-performance sweeping solution that comes equipped with our industry exclusive DustGuard™, which uses a light mist to suppress dust at the side brooms. The result is a dust controlled sweep path that’s 75% more productive than its nearest competitor.

Control dust with our industry exclusive DustGuard™, part of our DustClear™ Five-stage Dust Control System Capture more debris with the tailgate style hopper door Simplify operation and maximize efficiency — Analog-logic™ interface provides intuitive single motion activation of the sweep system, and the Set-’N-Forget™ pressure setting automatically adjusts sweep pressure as the main broom wears Ensure operator safety with our Clear-View™ design, large ergonomic operator comfort zone and large pneumatic tires Invest in a sweeper that’s built to last — rust-proof structural roto-molded hopper, integrated 5 mph bumper and rugged Kubota® industrial engine (battery power also available) Expedite service and repair with MaxAccess™ interlocking compartments for industry-best access to critical components

Equipment Type
Floor Cleaning / Rider Sweepers