Skyjack SJ4726/32 Scissor Lift
Details
Skyjack’s SJ4726/32 DC Scissor Lifts are ideal for indoor work where accuracy and precision turns around sensitive material is critical.
- Equipment Type
- Aerial Lifts / New Scissor Lifts
Work Height:
SJ3226: 31’ 8” (9.65 m)
SJ3232: 37’ 8” (11.48 m)
Raised Platform Height:
SJ3226: 25’ 8” (7.82 m)
SJ3232: 31’ 8” (9.65 m)
Lowered Platform Height:
SJ3226: 46” (1.17 m)
SJ3232: 50” (1.27 m)
Overall Width:
47” (1.19 m)
Overall Length:
91.6” (2.32 m)
Weight:
SJ3226: 5,537 lbs (2,511 kg)
SJ3232: 5,496 lbs (2,492 kg)
Lift Time (With Rated Load):
SJ3226: 52 sec
SJ3232: 50 sec
Lower Time (With Rated Load):
SJ3226: 64 sec
SJ3232: 52 sec
Drive Speed (Stowed):
2.0 mph (3.2 km/h)
Drive Speed (Raised):
0.6 mph (1.0 km/h)
Maximum Drive Height:
Full Height
Capacity (overall):
SJ3226: 1,000 lbs (454 kg)
SJ3232: 700 lbs (318 kg)
- Drivable at full height
- Variable speed, rear two wheel hydraulic drive
- Dual holding brakes
- SKYCODED™ Color coded and numbered wiring system
- On-board visual interface with diagnostic capabilities
- Shroud style, impact resistant composite control box with extended cable
- Proportional controls for drive & lift functions
- Tilt sensor (3.5° x 1.5°)
- 4’ (1.22 m) Roll out extension deck
- 24V DC Power source
- Low voltage battery protection
- 25% Grade-ability
- Solid rubber, non-marking tires
- Pothole protection system
- 110V AC Outlet on platform with GFI
- 28 mph (12.5 m/s) Wind rating
- Tilt alarm with drive & lift cut-out
- All motion audible alarm
- Lanyard attachment points
- Operator horn
- Forklift pockets and tie down/lift lugs
- Overload sensing system
- Fold down hinged railing system
- Half height spring hinged entry gate
- Telematics ready
- 2-Year Gold Leaf Warranty (5-year structural warranty)
Details
Skyjack’s SJ4726/32 DC Scissor Lifts are ideal for indoor work where accuracy and precision turns around sensitive material is critical.
- Equipment Type
- Aerial Lifts / New Scissor Lifts
