Drexel SL80AC Forklift

Details

The Drexel model SL80AC is a high capacity SwingMast® model that works in aisles as narrow as 66″ (1.7 M), has a basic capacity of 8,000 lbs. (3629 kg) at 24″ (600 mm) load center and has lift heights available to 281” (7.14 M).

The SL80AC is a 4-Wheel SwingMast® VNA and Side Loading forklift with independently driven front wheels and dual rear steer tires. The front mast rotates 90°, has side shift of 30” (762 mm), allows easy stacking in Very Narrow Aisles. It can work inside and outside on paved surfaces and can perform the jobs of high capacity front loading and side loading forklifts including working in bulk storage, cantilever rack, push-back rack, double deep and climbing steep ramps. The SL range does the jobs of reach and counterbalanced trucks in aisles over 40% smaller. The ability to store and transport heavy long loads as a side loader increases versatility and maximizes utilization.

Exceptional Performance and Maneuverability

The SL80AC’s fast lift/lower and travel speeds with a tight turning radius provides excellent maneuverability and productivity. The optional roll-out battery compartment allows fast battery changes for multi-shift operations. High Visibility three and four-stage masts are available for a wide range of applications including those with low overhead obstructions requiring high lift heights. Wire Guidance is a standard option on this model allowing safe, full-speed travel in the narrowest aisles.

Maximizes Material Handling Productivity

The versatile SL80AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse pallet-handling operations. The unique design allows operators to use it as a counterbalance truck indoors or out, operates in very narrow aisles in the warehouse, and replace reach and counterbalanced trucks that require much wider aisles. The operator’s compartment is offset providing a wide, long load-carrying side deck to be used as side loaders. The front tires are 20″ (508 mm) diameter and the rear/steer tires are 16.25” (413 mm) dia. providing great under clearance for avoiding floor obstructions. The rear steer axle is articulated to provide a smooth ride over rough floor conditions.

Equipment Type
4 Wheel Electric Forklift Trucks / Forklifts

Capacity:
8,000 lb. (3,629 kg)

Power Source:
Battery, Electric 80V

Weight With Battery:
20,900 lbs (9,500 kg)

Travel Speed:
Loaded: 6.9 mph (11.1 kph)
Unloaded: 7.7 mph (12.3 kph)

Lift Speed:
Loaded: 55 fpm (16.7 mpm)
Unloaded: 70 fpm (21.3 mpm)

Lower Speed:
Loaded: 95 fpm (28.9 mpm)
Unloaded: 60 fpm (18.2 mpm)

Wheelbase:
56 in (1,422 mm)

Chassis Width:
56 in (1,422 mm)

Turning Radius:
96.5 in (2,451 mm)

Max Lift Height:
281 in (7.14 m)

  • 8,000 lb. (3629 kg) Capacity at 24″ (600 mm) Load Center
  • Four-Wheel Design, Independently Driven Front Drive Wheels and Dual Rear Steering Wheels Provide Excellent Maneuverability and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • Dual Joysticks Control all Hydraulic Functions
  • Hydrostatic Power Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • Adjustable Suspension Seat Improves Operator Comfort
  • Large Battery Compartment Allows Maximum Battery Capacity for Long Run Times
  • High Visibility Mast Allows Optimum Safety and View of Loads and Forks
  • AC and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • High Efficiency Curtis SEPEX Controllers Provide Trouble-Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 80 Volt Electrical System
Details

The Drexel model SL80AC is a high capacity SwingMast® model that works in aisles as narrow as 66″ (1.7 M), has a basic capacity of 8,000 lbs. (3629 kg) at 24″ (600 mm) load center and has lift heights available to 281” (7.14 M).

The SL80AC is a 4-Wheel SwingMast® VNA and Side Loading forklift with independently driven front wheels and dual rear steer tires. The front mast rotates 90°, has side shift of 30” (762 mm), allows easy stacking in Very Narrow Aisles. It can work inside and outside on paved surfaces and can perform the jobs of high capacity front loading and side loading forklifts including working in bulk storage, cantilever rack, push-back rack, double deep and climbing steep ramps. The SL range does the jobs of reach and counterbalanced trucks in aisles over 40% smaller. The ability to store and transport heavy long loads as a side loader increases versatility and maximizes utilization.

Exceptional Performance and Maneuverability

The SL80AC’s fast lift/lower and travel speeds with a tight turning radius provides excellent maneuverability and productivity. The optional roll-out battery compartment allows fast battery changes for multi-shift operations. High Visibility three and four-stage masts are available for a wide range of applications including those with low overhead obstructions requiring high lift heights. Wire Guidance is a standard option on this model allowing safe, full-speed travel in the narrowest aisles.

Maximizes Material Handling Productivity

The versatile SL80AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse pallet-handling operations. The unique design allows operators to use it as a counterbalance truck indoors or out, operates in very narrow aisles in the warehouse, and replace reach and counterbalanced trucks that require much wider aisles. The operator’s compartment is offset providing a wide, long load-carrying side deck to be used as side loaders. The front tires are 20″ (508 mm) diameter and the rear/steer tires are 16.25” (413 mm) dia. providing great under clearance for avoiding floor obstructions. The rear steer axle is articulated to provide a smooth ride over rough floor conditions.

Equipment Type
4 Wheel Electric Forklift Trucks / Forklifts