Skyjack SJ1056 TH Telehandler

Details

Skyjack SJ1056 TH telehandlers are designed with all major service points easily accessible, limiting downtime and increasing our customers’ utilization.

SMARTORQUE

Using an optimized balance of engine horse power, torque, and hydraulic performance, Skyjack SMARTORQUE™ products deliver the same on-site job performance as higher power units – providing excellent performance with less engine horsepower. Less emission controlling components avoids the cost associated with their complexity, as well as the time and inconvenience required in maintaining them. SMARTORQUE™ means no Diesel Particulate Filter (DPF), no Diesel Exhaust Fluid (DEF)/AdBlue, and no other active exhaust after treatment.

FLEXCAB

The SJ1056 TH telehandlers feature an innovative cab design that allows fleet operators to easily convert between open and enclosed cabs with simple hand tools, providing increased flexibility for fleet movement and fast response to customer demands. Easily sourced flat glass panels with no custom curved profiles and a bolt-on/bolt-off window retention system ensures minimal downtime and incurred costs for repairing damaged glass in the field.

AXLDRIVE

An axle-based drive system with an operator controlled locking differential on the rear axle and limited slip differential on the front axle. This drive system has been proven as durable, low maintenance, and capable of navigating any job site terrain.

Equipment Type
Construction & Ag / Telehandler/Articulated Telescopic

Maximum Lift Capacity:
10,000 lbs (4,535 kg)

Maximum Lift Height:
56’ 3” (17.14 m)

Rated Lift Capacity @ Maximum Height:
4,000 lbs (1,814 kg)

Rated Lift Capacity @ Maximum Height with O/R:
6,000 lbs (2,722 kg)

Maximum Forward Reach:
42’ 2” (12.85 m)

Rated Lift Capacity @ Maximum Reach:
400 lbs (181 kg)

Rated Lift Capacity @ Maximum Reach with O/R:
3,000 lbs (1,361 kg)

Overall Length – Less Forks:
22’ 2” (6.75 m)

Overall Height – Stowed:
8’ 1” (2.47 m)

Overall Width:
8’ 5” (2.56 m)

Ground Clearance:
19” (48.3 cm)

Turning Radius – Outside:
153” (3.89 m)

Operating Weight:
33,336 lbs (15,121 kg)

Engine:
74hp / 287 lb-ft Deutz TCD 3.6L T4F

Max Travel Speed – Forward:
15 mph (24 km/h)

Drawbar Pull:
20,000 lbs

Transmission:
Dana Powershift, 3 speeds F/R

Axles:
Dana

Steering:
3 mode (Front Wheel, 4 Wheel, Crab)

Tires:
Foam-Filled 14 x 24 16PR Grip Lug

Fuel Tank Capacity:
35 gal.(132 L

Hydraulic Reservoir:
43.85 gal. (166 L)

  • Axle mount outriggers
  • Auxiliary hydraulics
  • Engine block heater
  • Quick attach carriage mount
  • Rear window with wiper
  • Side window
  • Suspension seat
  • Single multifunction pilot operated joystick control
  • In-cab engine multifunction display
  • Hydraulic test ports
  • Lockable in-cab storage box
  • Rear towing hitch pin
  • Steel engine cowling
  • Steel component and access covers
Details

Skyjack SJ1056 TH telehandlers are designed with all major service points easily accessible, limiting downtime and increasing our customers’ utilization.

SMARTORQUE

Using an optimized balance of engine horse power, torque, and hydraulic performance, Skyjack SMARTORQUE™ products deliver the same on-site job performance as higher power units – providing excellent performance with less engine horsepower. Less emission controlling components avoids the cost associated with their complexity, as well as the time and inconvenience required in maintaining them. SMARTORQUE™ means no Diesel Particulate Filter (DPF), no Diesel Exhaust Fluid (DEF)/AdBlue, and no other active exhaust after treatment.

FLEXCAB

The SJ1056 TH telehandlers feature an innovative cab design that allows fleet operators to easily convert between open and enclosed cabs with simple hand tools, providing increased flexibility for fleet movement and fast response to customer demands. Easily sourced flat glass panels with no custom curved profiles and a bolt-on/bolt-off window retention system ensures minimal downtime and incurred costs for repairing damaged glass in the field.

AXLDRIVE

An axle-based drive system with an operator controlled locking differential on the rear axle and limited slip differential on the front axle. This drive system has been proven as durable, low maintenance, and capable of navigating any job site terrain.

Equipment Type
Construction & Ag / Telehandler/Articulated Telescopic