The Genie Fall arrest bar* accessory for ANSI and CSA boom lifts is an exciting addition to any fleet. The fall arrest bar is available for either 6 ft. or 8 ft. platforms and quickly attaches on nearly all Genie booms. The accessory allows a user to exit the platform and work comfortably outside of the platform with a 6 ft. shock absorbing lanyard.
Genie® Lift Guard™ Contact Alarm Application Part Number
Genie® Lift Guard™ Contact Alarm
The Lift Guard™ Contact Alarm is designed to alert ground personnel when an operator makes contact with the platform control panel, interrupting boom movement, sounding an alarm and flashing a warning light. The system is designed to be unobtrusive, featuring a activation cable fitted above the boom lift’s control panel. When the activation cable is tripped, the lift and drive functions are disabled at the platform. Then audio and visual warnings will activate alerting others that assistance may be needed. These notifications will continue until the system is reset — simply click the activation cable back into place.
Genie® Lift Guard™ Platform Mesh Accessories Application Part Number
Genie® Lift Guard™ Platform Mesh Accessories
Genie® protective solutions continue to evolve to meet the demands of today’s aerial jobsites. The Genie Lift Guard™ Platform Mesh family of accessories is designed to prevent dropped objects falling from aerial worksites. With three options to choose from — half-height aluminum, full-height aluminum and removable woven screen, these contemporary mesh accessories engineered to help operators keep jobsite materials and tools from falling out of boom platforms working at height.
The Genie Lift Power™ system includes a new generation of hydraulically driven generators for your customers, and their operators, who relay on productive power at the platform to get their work done. This new configuration is a significantly different design from its predecessor system. Instead of relying on the lift circuit or drive hydraulic circuit, this new generator system runs on a stand-alone circuit with a separate hydraulic pump to supply continuous power. This contemporary accessory allows your customers to lift, drive and power tools, such as heavy-duty welders, for increased productivity.
Genie® Lift Tools™ Access Deck – Booms Application Part Number
Genie® Lift Tools™ Access Deck – Booms
The new Genie® Lift Tools™ Access Deck for boom lifts provides operators with a secondary surface to work from, elevating them 22 in (0.56 m) above the platform floor. Attached to the platform midrail, this additional access enables operators to get into restricted spaces to increase productivity.
Providing more than 3 sq ft (0.27 m) of additional work area in the platform, this accessory is designed for use on jobsites where operators in a standard boom platform cannot reach their work. This additional access is ideal for use in HVAC, electrical, lighting, plumbing and welding applications, as well as between rafters or other structures at height. It is rated for both indoor and outdoor use.
Genie® Lift Tools™ Expo Installer Application Part Number
Genie® Lift Tools™ Expo Installer
Designed to make operators more efficient when working at height, the Genie® Lift Tools™ Expo Installer allows for precise, easy placement of signs, banners and hanging décor. Ideal for use in convention centers, arenas, malls, theaters and other locations that decorate with suspended ornamentation, this new accessory helps to maximize safe productivity while operating Genie booms.
This is an indoor-use only aftermarket accessory, available through Genie Genuine Parts, designed for 6-ft and 8-ft articulating and telescopic boom platforms. This new option allows operators to hang signs, banners and décor at height.
Genie® Lift Tools™ Material Carrier Application Part Number
Genie® Lift Tools™ Material Carrier
The new Genie® Lift Tools™ Material Carrier attachment offers Genie GS™-2669, GS-3369 GS-4069, GS-3390, GS-4390 and GS-5390 DC and RT rough terrain scissor lift operators a solution to efficiently carry materials to jobsites. Designed to accommodate a wide range of materials and higher load capacities than a standard pipe cradle attachment, this new Genie accessory is ideal for use in applications that require lifting materials to height, such as tilt-up construction, post-frame building construction, fire suppression installation, HVAC installation, rooftop contracting and facility maintenance.
The large carriage and high capacity of the Genie Lift Tools Material Carrier attachment is suitable for multitude of material types, including lumber, pipe, HVAC materials, siding and plate material.
Genie® Operator Protective Structure (OPS) Application Part Number
Genie® Operator Protective Structure (OPS)
The Genie OPS is an optional device for installation on an S or Z boom lift and provides secondary protection for operators in the event of contact with an overhead obstacle in certain applications. The Genie OPS features a tubular steel structure designed to transfer the kinetic energy into surrounding structures while maintaining a protected area for the operator. The device can be attached to boom lifts with 6 ft. to 8 ft. platforms and allows for excellent visibility. It weighs 36 lbs. and is bolted directly on the boom lift’s platform; no modifications are needed.
Provides secondary operator protection in work near overhead obstacles.
Designed, tested and approved by Genie, pipe cradles reduce the risk of fatigue by providing a secure way to lift pipes when working from a scissor lift or even an S or Z boom lift. Genie pipe cradles deliver stability and rigidity with a robust design which transfers the load away from the guard rails and onto the platform deck. The pipe cradle assembly mounts easily to the platform guardrails with U-bolts and rests on the floor of the platform when installed.
Maximum Capacity Rating: 200 lbs.
Assists in installing materials such as: Pipes, sprinkler systems, plumbing.
85300GT available on all S and Z boom lifts (Must order 2 per machine).
72878GT (available on GS-2046, GS-2646, GS-3246)
131626GT (available on GS-2668, GS-3268, GS-2669, GS-3369, and GS-4069)
131627GT (available on GS-3384, GS-3390, GS-4390, GS-5390)
The swing gate replaces the standard sliding mid-rail for walk-in access to the platform. This allows for easy entry and exit when wearing a tool belt, carrying a tool box, or loading materials into the platform.
Helps people enter into the platform and bring materials with them more efficiently.
With the Genie Tech Pro™ Link diagnostics tool, everything you need to know is right in the palm of your hand. It allows users to monitor a machine's gauges, including engine temperature, oil pressure, fuel levels and battery voltage, calibrate the machine, make speed adjustments during pre-operation inspection, get service alerts and reminders, track maintenance intervals, receive fault code information and so much more - all from the palm of your technician's hand. The information is readily available without having to navigate layers and layers of menu structure. This device is designed to provide real-time information that will keep your Genie boom lift up and running, maximizing your customers' productivity and your rental return on invested capital (rROIC). The Genie Tech Pro Link handheld device is currently compatible for use with the CAN-enabled control systems on mid-sized Genie S® telescopic Xtra Capacity™ (XC™) booms.
This easily-installed tool tray is designed to help eliminate clutter and potential tripping hazards by providing operators and workers with a convenient place to store their tools, fasteners and small materials in the platform.
To hold tools needed for the job including: screws, bolts, and cleaning supplies.